Configuring Prometheus
Prior to using Prometheus, it needs basic configuring. Thus, we need to create a configuration file named prometheus.yml
The configuration file of Prometheus is written in YAML which strictly forbids to use tabs. If your file is incorrectly formatted, Prometheus will not start. Be careful when you edit it.
Open the file prometheus.yml in a text editor:
sudo nano /etc/prometheus/prometheus.yml
Prometheus’ configuration file is divided into three parts: global, rule_files, and scrape_configs.
In the global part we can find the general configuration of Prometheus: scrape_interval defines how often Prometheus scrapes targets, evaluation_interval controls how often the software will evaluate rules. Rules are used to create new time series and for the generation of alerts.
The rule_files block contains information of the location of any rules we want the Prometheus server to load.
The last block of the configuration file is named scape_configs and contains the information which resources Prometheus monitors.
Our file should look like this example:
global:
scrape_interval: 15s
evaluation_interval: 15s
rule_files:
# - "first.rules"
# - "second.rules"
scrape_configs:
- job_name: 'prometheus'
scrape_interval: 5s
static_configs:
- targets: ['localhost:9090']
The global scrape_interval is set to 15 seconds which is enough for most use cases.
We do not have any rule_files yet, so the lines are commented out and start with a #.
In the scrape_configs part we have defined our first exporter. It is Prometheus that monitors itself. As we want to have more precise information about the state of our Prometheus server we reduced the scrape_interval to 5 seconds for this job. The parameters static_configsand targets determine where the exporters are running. In our case it is the same server, so we use localhost and the port 9090.
As Prometheus scrapes only exporters that are defined in the scrape_configs part of the configuration file, we have to add Node Exporter to the file, as we did for Prometheus itself.
We add the following part below the configuration for scraping Prometheus:
- job_name: 'node_exporter'
scrape_interval: 5s
static_configs:
- targets: ['localhost:9100']
Overwrite the global scrape interval again and set it to 5 seconds. As we are scarping the data from the same server as Prometheus is running on, we can use localhost with the default port of Node Exporter: 9100.
If you want to scrape data from a remote host, you have to replace localhost with the IP address of the remote server.
Tip: For all information about the configuration of Prometheus, you may check the configuration documentation.
Set the ownership of the file to our Prometheus user:
sudo chown prometheus:prometheus /etc/prometheus/prometheus.yml
Our Prometheus server is ready to run for the first time.

Running Prometheus

  1. 1.
    Start Prometheus directly from the command line with the following command, which executes the binary file as our Prometheus user:
sudo -u prometheus /usr/local/bin/prometheus --config.file /etc/prometheus/prometheus.yml --storage.tsdb.path /var/lib/prometheus/ --web.console.templates=/etc/prometheus/consoles --web.console.libraries=/etc/prometheus/console_libraries
The server starts displaying multiple status messages and the information that the server has started:
level=info ts=2018-04-12T11:56:53.084000977Z caller=main.go:220 msg="Starting Prometheus" version="(version=2.2.1, branch=HEAD, revision=bc6058c81272a8d938c05e75607371284236aadc)"
level=info ts=2018-04-12T11:56:53.084463975Z caller=main.go:221 build_context="(go=go1.10, [email protected], date=20180314-14:15:45)"
level=info ts=2018-04-12T11:56:53.084632256Z caller=main.go:222 host_details="(Linux 4.4.127-mainline-rev1 #1 SMP Sun Apr 8 10:38:32 UTC 2018 x86_64 scw-041406 (none))"
level=info ts=2018-04-12T11:56:53.084797692Z caller=main.go:223 fd_limits="(soft=1024, hard=65536)"
level=info ts=2018-04-12T11:56:53.09190775Z caller=web.go:382 component=web msg="Start listening for connections" address=0.0.0.0:9090
level=info ts=2018-04-12T11:56:53.091908126Z caller=main.go:504 msg="Starting TSDB ..."
level=info ts=2018-04-12T11:56:53.102833743Z caller=main.go:514 msg="TSDB started"
level=info ts=2018-04-12T11:56:53.103343144Z caller=main.go:588 msg="Loading configuration file" filename=/etc/prometheus/prometheus.yml
level=info ts=2018-04-12T11:56:53.104047346Z caller=main.go:491 msg="Server is ready to receive web requests."
Open your browser and type http://IP.OF.YOUR.SERVER:9090 to access the Prometheus interface. If everything is working, we end the task by pressing on CTRL + C on our keyboard.
If you get an error message when you start the server, double-check your configuration file for possible YAML syntax errors. The error message will tell you what to check.
The server is working now, but it cannot yet be launched automatically at boot. To achieve this, we have to create a new systemd configuration file that will tell your OS which services should it launch automatically during the boot process.
sudo nano /etc/systemd/system/prometheus.service
The service file tells systemd to run Prometheus as prometheus and specifies the path of the configuration files.
Copy the following information in the file and save it, then exit the editor:
[Unit]
Description=Prometheus Monitoring
Wants=network-online.target
After=network-online.target
[Service]
User=prometheus
Group=prometheus
Type=simple
ExecStart=/usr/local/bin/prometheus \
--config.file /etc/prometheus/prometheus.yml \
--storage.tsdb.path /var/lib/prometheus/ \
--web.console.templates=/etc/prometheus/consoles \
--web.console.libraries=/etc/prometheus/console_libraries
ExecReload=/bin/kill -HUP $MAINPID
[Install]
WantedBy=multi-user.target
To use the new service, reload systemd:
sudo systemctl daemon-reload
We enable the service so that it will be loaded automatically during boot:
sudo systemctl enable prometheus
Start Prometheus:
sudo systemctl start prometheus
Your Prometheus server is ready to be used.
We have now installed Prometheus to monitor your instance. Prometheus provides a basic web server running on http://your.server.ip:9000 that provide access to the data collected by the software.
Export as PDF
Copy link
Edit on GitHub