Website: nForce
Things to note before setting up on Nforce.
Only certain chasis and CPU configuration have SGX enabled.
You need to manually communicate with Nforce to give you the right configuration so that SGX works on the BIOS.
For the purpose of this Guide i selected the HP DL20 G10 Chasis. For the CPU i slected the Intel E2174G (3.8-4.7 Ghz, 4C/8T)
With 32 GB ram, Ubuntu OS 20.04, and 512 GB SSD.
This takes about 1 day, you may need to make sure they have the servers, if they do not make sure you request only the same configuration or the SGX wont be enabled.
The SSC portal is only enabled once you finish the payment. Go to your dedicated servers and select the image. Go to remote management and create a session to log into the BIOS via IPMI. You'll need to make sure Hyper Threading is disabled.
Login with your credentials and proceed with SGX installation.